Відео

i have this device... can it encode a new key?

Ah yes a 2009 bmw is a *new* car

for those who want to know the yellow poly bushes have a shore-a rating of 60, purple is 70 and black is around 90 so this would be softer than normal poly bushes but still harder than default rubber.

I love everything about the person you are. Life saver

Very late to this thread but wouldn't a battery load tester have caught this with one test - admittedly one has to have one!!! 😁

I have actualy the same problem one week ago i smelling shit in my car. what the hack is this i am checking the back seat carpit and its full whit water holly molly.

"for the newer BMW's out there" pans to a 15 year old iDrive lmaooooooooooo

It works I been doing this .

Battery dead on 2017 X5 … I found the manual tailgate latch in order to access rear battery compartment. On inside left corner of lower tailgate there is a small square cover panel, pop that open with a flathead screw driver, pull the little cover (cable is attached) and it will manually unlatch the top tailgate.

Battery dead on 2017 X5 … I found the manual tailgate latch in order to access rear battery compartment. On inside left corner of lower tailgate there is a small square cover panel, pop that open with a flathead screw driver, pull the little cover (cable is attached) and it will manually unlatch the top tailgate.

Dude! A++++ for the video!

How the heck did you remove the front glass.

How do you open the trunk without power... the tail gate is closed!

Hi, my key can insert in the right door but can’t turn to unlock. It can only unlock the left door. What could be the issue and how to fix it ?

thank u for making this video!

Rare to see a BMW with the stereo working

These are the useless type of videos that people make explaining their issues, but not once he show how to fix it.

Thank you so much! We had the same issue w our Volvo X90. You were easy to listen to and to the point! Thank you

Thx

Thank you for possible reason, my 325i has the same problem trying to solve it, but interesting

A very clear video and still useful in 2024!. Now it's a question not only of saving money but of finding someone who knows the hood mechanism of a 25 year old BMW. Much better to sort it myself. Thank you Zach.

Great troubleshooting: well done!

Don't you have to use a primer to the surface your using that adhesive?

I saw a comment to warm up the material to make it easier to squeeze the gun. may have saved your first gun.

Keep your rubber bushings from failing: spray them down with AT-205 stop leak.

My main sunroof don't even open just tilt😭

This works when done properly. A quick spray with brake clean is not cleaning all that road grime and such you can still clearly see. This will effect the overall performance of this and the longevity of the installation. Take a brush, wire or plastic, tooth brush works even, and scrub it with a bit of dawn and water mixture. Or alternately, you can get that engine cleaner from Gunk. Dawn tends to be a bit cheaper in the long run, you get a lot more for your buck. After you scrub it up a good bit knocking all that grime loose, THEN blast it with some brake clean, or 90-99% IPA (isopropyl alcohol). Then you can install your window weld or other tubed poly product, and expect it to stick much better. Watch someone install a window or windshield. They clean and prime the location before applying the polyurethane.

Thank ya sir, any particular glue you reccomend? And what if my door panel on passenger rear is just a little loose do you think that maybe means I need to replace the door panel?

Automatic tool ?

Great video help me unclog my nieces 2010 x3

you were so patient with solving the issue. I wonder why you didn't have a scan tool. It would help a lot.

Awesome video. I will be doing this soon. Thanks for showing me that I don't have to fully disassemble the whole intake side. How was it bolting the exhaust manifold back in?

Woow that is patient good job there

Thanks, just followed your steps and I fixed mine. It was cracked, so super glued it.

Super Video genau das habe ich gesucht Danke LG

what about if you’re battery is dead and you need to get underneath the hood! 😭PLEASE HELP!

This dude is Moist Critical's twin

To be fair.. This is how they build them at the factory.. They just shoot practically the same urethane into a mold and make it look prettier.. :)

Can also double them up to 14

I think it needs one week to dry if you are filling mount,i did it on my friend e46 about 6 years ago and it was window weld of unknown brand but its ok till now no vibration also tried it in my altima 2006 2.5 for 3 engine mounts and transmission mount but for one the rear mount the urethane separate but the mount still brand new but ill reapply again and that was about 3 years ago

Need to see how to string it diagram

what also sucks, when you open that 30,00 tube of 3M it is very hard to seal it completely to make it last for a long time... Its like any caulk, They dont last and dry up quick. I have tried everything and nothing works so you have to use it elsewhere within a week or 2.

Wait is it possible that is why my truck won't fully close

Bass stopped working randomly ? Fix?

Car crank no start what is problem???

If car crank no start what that have to do with battery or alternator even little baby know about positive cable on battery that will disconnect after accident lol

Do anyone read post car crank no start

This works. I noticed something strange about my bushings when I had my car on the lift today and suspect the previous owner used this method to get more time out of his failing bushings. I've owned the car for 2 years now and have put over 40,000km on it and have not had a problem with the suspension yet.

Cream puff